Danfoss FP735Si Installation Guide download pdf (Page 6)

FP735SI

FP735Si is delivered with a set of parameters that have been pre-

programmed to cover the most typical type of installations. See

(5.0). If a di erent parameter setup is wanted the unit provides two

programming options:

4.0 Programming Options

4.1 Normal programming

Normal Programming is meant for setting the timing pro le that

controls the ON and OFF periods for the room heating and for the hot

water. A daily pro le may be programmed and a pro le can control

the entire week where the weekend may be handled separately. Also a

timing pro le for a holiday can be entered.

As part of the normal daily operations, a simple one-button press

(+HRS) can extend a running ON period for room heating and/or hot

water by one hour. This can be repeated 3 times giving up to 3 hours

extension.

3.4 Mount the unit on the wallplate

3.5 With the unit powered up, it is recommended to press and

release the RESET button to start up the FP735Si unit.

Note: Always switch

the mains o  rst

and never  t/remove

the timer to/from a

live wallplate.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Danfoss FP735Si Installation Guide Page 6