Danfoss SET 3E User Manual download pdf (Page 8)

SET3E

• Move the slider to the 2nd ON

position and use  and  keys

to set the time you want the

programmer to next come on.

• Move the slider to the 2nd

OFF position and use  and 

keys to set the time you want the

programmer to next go oﬀ .

Remember to return the slider switch to the RUN position after

programming.

2.0 Temporary User Overrides

Sometimes you may need to change the way you use your system

temporarily, i.e. due to unusually cold weather, increased hot water

requirements. The SET3E has two convenient overrides which can be

selected without aﬀ ecting the set programme.

Note: This will only work when the slider switch is in the RUN position and

will automatically cancel at the start of the next programmed event.

Advance

• Press the ADVANCE button once

to move forward to the next

programmed event.

• If the system is on it will go oﬀ .

If it is oﬀ it will come on.

• A bar on the left of the LCD

will remind you that you have

selected Advance.

• To cancel the override, press the

ADVANCE button again.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Danfoss SET 3E User Manual Page 8