Danfoss TripleLynx CN Installation Manual download pdf (Page 25)

1) According to FprEN 50524.

2) For fixed systems with semi-optimal conditions.

3) At identical input voltages. At unequal input voltages, V

mppmin

can be as low as 250 V depending on total input power.

4) SPL (Sound Pressure Level) at 1.5m.

5) Grid Management Box (TLX CN Pro and TLX CN Pro+) or third-party product.

5.2. Norms and Standards

Refer to Chapter 1, section

Conformity

for details.

5.3. Installation

Parameter Specification

Temperature

−25 °C - +60 °C (>45 °C derating)

Environmental class according to IEC IEC60721-3-3

3K6/3B3/3S3/3M2

Air quality ISA S71.04-1985

Level G2 (at 75 % RH)

Coastal, heavy industrial and farmer areas Must be measured and classified acc. to ISA S71.04-1985

Vibration 1G

Ingress protection class 54

Max. operating altitude 3000 m above sea level.

PELV protection is effective up to 2000 m above sea level only.

Installation Avoid constant stream of water.

Avoid direct sunlight.

Ensure adequate air flow.

Mount on non-flammable surface.

Mount upright on vertical surface.

Prevent dust and ammonia gases.

Table 5.2: Conditions for Installation

Parameter

Condition Specification

Wall Plate Hole diameter 30 x 9 mm

Alignment Perpendicular ± 5° all angles

Table 5.3: Wall Plate Specifications

5. Technical Data

24 L00410580-01_02

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32 33

No comments

Danfoss TripleLynx CN Installation Manual Page 25