Danfoss DHP-H User Manual download pdf (Page 23)

Danfoss – 23VUBMA102

3.2.2 Sub-menu OPERATION

In the OPERATION menu you can set the operating

mode of the heat pump.

When changing operating mode, confirm your

choice by pressing the right button once. The aster-

isk moves to the selected operating mode.

For further information, see the ”Setting operating

mode” section.

Menu text Description Adjusted by:

(OFF)

The installation is fully switched off.



Remember that if the operating

mode OFF is to be used for long

periods during the winter, the

water in the heating system in

the installation must be drained,

otherwise there is a risk of frost

damage.

⚠

By the customer,

if necessary.

AUTO

The heat pump and the auxiliary heater

are automatically controlled by the con-

trol computer.

By the customer,

if necessary.

HEATPUMP

The control computer is controlled so

that only the heat pump unit (compres-

sor) is allowed to operate.

By the customer,

if necessary.

ADD. HEAT

The control computer only permits the

auxiliary heater to be in operation. This

operating mode can be used when a new

installation is being used, when the brine

system is not ready for operation.

By the customer,

if necessary.

HOT WATER

In this mode the heat pump only produc-

es hot water, no heat goes to the heating

system.

By the customer,

if necessary.

AUTO *

HEATPUMP

ADD. HEAT

HOT WATER

OPERATION

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 45 46

Comments to this Manuals

No comments

Danfoss DHP-H User Manual Page 23

Comments to this Manuals

Related products and manuals for Water heaters & boilers Danfoss DHP-H