Danfoss DHP-H User Manual download pdf (Page 25)

Danfoss – 25VUBMA102

3.2.4 Sub-menu TEMPERATURE

In the TEMPERATURE menu you are able to view the

various temperatures that the installation has had. All

temperatures are stored 100 minutes (factory setting)

back in time so that they can also be displayed in the

form of graphs.

Menu text Description Adjusted by:

OUTDOOR Outdoor temperature

ROOM If ROOM shows 20°C the heat curve is

unaffected. If ROOM shows higher or

lower, this indicates that the heat curve

has been adjusted up or down to change

the indoor temperature.

By the customer,

if necessary.

SUPPLY PIPE Indicates the measured supply tempera-

ture of the heating system. (The desired

value is shown between brackets.)

Not adjustable

(The computer calcu-

lates the temperature

required to maintain the

indoor temperature.)

RETURN PIPE Indicates the measured return tem-

perature of the heating system. (The

highest permitted temperature is shown

between brackets.)

Authorized installer.

Adjusted for each instal-

lation.

HOT WATER Indicates measured hot water tem-

perature. (The temperature at which

hot water production starts is shown

between brackets.)

Not adjustable

INTEGRAL Heat production is controlled by a calcu-

lated demand that is automatically cal-

culated when the installation is in opera-

tion. The integral is the heat system’s

energy balance.

Not adjustable

BRINE OUT The temperature of the brine when it

returns to the heat source.

Not adjustable

BRINE IN The temperature of the brine from the

heat source.

Not adjustable

TEMPERATURE

OUTDOOR -20°C

ROOM 20°C

SUPPLY PIPE 41(70)°C

RETURN PIPE 38(48)°C

HOT WATER 55(44)°C

INTEGRAL -660

BRINE OUT -7°C

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 45 46

Comments to this Manuals

No comments

Danfoss DHP-H User Manual Page 25

Comments to this Manuals

Related products and manuals for Water heaters & boilers Danfoss DHP-H