Danfoss AKA 245 Installation Guide download pdf (Page 3)

AKM/AK Monitor/AK Mimic Installation guide RI8BP602 © Danfoss 10/2011 3

Options

AKM4 / AKM5

AKM is the programme with many functions. The programme

gives you an overview of all functions in all connected refriger-

ating systems. The programme is used by service centres or in

systems where more functions are required than can be obtained

with AK Monitor.

The AKM5 has a graphic user interface.

AK Monitor / AK-Mimic

AK Monitor is the programme with a few easy-to-use functions.

The programme gives you an overview of temperatures and

alarms in the local refrigerating plant. The AK-Mimic has a graphic

user interface.

Here you can see a service centre with connections to other

systems:

- A gateway is connected to Com 1. The Gateway acts as a buﬀer

when alarm buﬀer when alarms come in from external systems.

- A modem is connected to Com 2. This calls the various systems

that undertake service.

- A GSM modem is connected to Com 3. Alarms are sent from here

to a mobile telephone.

- A converter is connected from Com 4 to a TCP/IP. From here there

is access to external systems.

- There is also access to the TCP/IP from the computer net card

and on from there via Winsock.

An example is shown here from a food store. A number of control-

lers regulate the individual refrigeration points. The modem

gateway collects data from each of the refrigeration points and

transfers these data to the PC with the AK Monitor or to a service

centre via the modem connection.

Alarms are transmitted to the PC during the shop’s opening hours

and to the service centre outside of opening hours.

TCP/IP

Example

1 2 3 4 5 6 7 8 ... 27 28

No comments

Danfoss AKA 245 Installation Guide Page 3