Danfoss ECtemp 550 Installation Guide download pdf (Page 15)

How to enter the basic configuration settings

1. Press and hold the button for 12 seconds

until “COdE” appears.

2. Turn the button clockwise until “0044”

appears.

3. Press the button once to confirm.

Network: How to specify whether you want to connect

this thermostat with other thermostats in a network

Please note that the slave units must be connected to the

master unit using the devinet terminals.

1. Define the thermostat as independent, master or

slave unit.

To define this unit as an independent

unit or if network is not used, choose

ALO.

To define this unit as the master unit in

the network, choose MAS.

ECtemp 550

Installation Guide 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

No comments

Danfoss ECtemp 550 Installation Guide Page 15