Solar-Log500: Configuration at the unit
Configuring system settings (“System” menu)
Solar-Log
1000/500/200
Installation 195 of 268
9.3 Configuring system settings (“System” menu)
Under System settings the following settings are made:
Display language
Date and time
Settings for large display
9.3.1 Setting the display language (System/Language)
The selected display language applies both to the display and the web browser.
1 Select System/Language from the menu.
2 Select the desired display language from the list
3 Press ENTER to save
9.3.2 Setting the date, time and currency format (System/Country)
The country setting affects how the date, time and currency formats are displayed.
1 Select System/Country from the menu.
2 Select your country from the list.
3 Press ENTER to save
9.3.3 Adjusting the date/time (System / Date/Time)
The clock time is factory-set, but it may be lost due to long periods of storage.
The time zone, date and summertime values must be set correctly, so that no in-
correct statuses or results are obtained during monitoring and graph display, e.g.
when e-mail messages are sent or when a curve is displayed on the day graph.
Any incorrect settings can be corrected in the “Date/Time” submenu.
Correcting the time zone
1 Select System/Date/Time/Time zone from the menu.
2 Enter the time difference in hours (default is GMT +1)
3 Press ENTER to save
Correcting the date
1 Select System/Date/Time/Date from the menu.
2 Adjust the date
3 Press ENTER to save
Correcting the time
1 Select System/Date/Time/Time from the menu.
2 Adjust the time
3 Press ENTER to save
Comments to this Manuals